AOpen OpenBook 1556, Руководство по обслуживанию

Страница: 39 / 128

Chapter 2 31
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m
during POST
Navigating the BIOS Utility
There are six menu options: System Information, Main System Settings, Advanced, System Security, Boot
Options and Exit Setup.
To enter a menu, highlight the item using the
w
/
y
keys, then press
e
.
Within a menu, navigate through the BIOS Utility by following these instructions:
T
Press the
w
/
y
keys to move between the parameters.
T
Press the
z
/
x
keys to change the value of a parameter.
T
Press the
|
key while you are in any of the menu options to return to the main menu.
NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys are
shown at the bottom of the screen.
PhoenixBIOS Setup Utility
Information
Main Advanced Security Boot Exit
CPU
Type
System Memory
Extended Memory
HDD1 Serial Number
System BIOS Version
VGA BIOS Version
KBC
Version:
Serial Number
Asset Tag Number
Product Name
Manufacture Name
UUID Number
Intel(R) Pentium(R) M processor 1300MHz
640 KB
xxxxxx KB
xxxxxxxxxxxx
R01-xxx
xxxxxx
02.13.xx
xxxxxxxxxxxx
xxxxxxxxxxxx
xxxxxxxxxxxx
xxxxxxx
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
F1 Help ÏÐ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ÍÎ Select Menu Enter Select ¾ Sub-Menu F10 Save and Exit
System Utilities
Chapter 2