F
F
o
o
r
r
t
t
r
r
e
e
s
s
s
s
7
7
7
7
0
0
0
0
/
/
7
7
9
9
0
0
0
0
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
Using
or to move between options, then press
to display a pop-up menu with a list of options.
Using
or
to select an option, then press
.
4.4.1 Host Adapter BIOS
This option enables or disables the SCSI controller BIOS. The default setting is
Enabled
.
The SCSI controller BIOS must be enabled if you want the system to boot from a SCSI hard disk drive connected to the SCSI controller.
Several SCSISelect
™
options cannot be used unless the SCSI controller BIOS is enabled.
4.4.2 Display <Ctrl-A> Message During BIOS Initialization
This option allows entering the SCSISelect
™
utility during BIOS initialization. The default setting is
Enabled
.
4.4.3 Extended BIOS Translation for DOS Drives > 1 GByte
This option allows you to enable or disable extended translation for SCSI hard disks with a capacity greater than 1 GB. This is valid only
if the SCSI controller BIOS is enabled. The default factory setting is
Enabled
.
When enabled, this option uses the following translation schemes:
•
SCSI hard disks < 1 GB
use a translation scheme of 64 heads, 32 sectors per track
•
SCSI hard disks > 1 GB
use a translation scheme of 255 heads, 63 sectors per track
138
Open
A
