Hardware Installation English
-- E-9 --
Ÿ
Device Configuration Jumper
Used when selecting the device configuration of E-IDE. Don’t use jumpers to
change anything besides the device configuration. Configuration changes
become valid after power is turned off, then on again. The device configuration
jumper will be set to
Master
as factory default setting.
3.3.
Installing the CD-R/RW drive
Power off your computer and all peripheral devices. Unplug the computer’s power cord
from wall outlet or from the power strip.
Required Tools
Ÿ
A medium-size screwdriver
Ÿ
A long-nosed pliers
Ÿ
Your computer system or motherboard manual (to locate your computer
system’s IDE controller).
Installation Procedure
The discharge of static electricity can damage electronic circuitry. You can
avoid static discharge by touching a grounded metal object, like your
computer case, before and during installation of hardware inside your
computer.
Note:
Installing jumper
pins besides the ones for
device configuration
settings may be the cause
of damage or abnormal
drive operation.
