AMI BIOS Utility
3-5
Type
This parameter lets you set the IDE device type that your system supports.
The options are
User
,
Auto
,
CD-ROM
,
Type 1-46
, and
Not
Installed
. Select
Auto
to automatically configure the installed hard disk
or IDE device. Select
CD-ROM
if you have a
CD-ROM
installed in your
system. If you have an old type HDD installed, you may need to enter the HDD
parameters manually. To do this, you must set this parameter to
User
. Set
this to
Not Installed
to bypass the function.
LBA/Large Mode
This enhanced IDE feature allows the system to use a hard disk with a capacity
of more than 504 MB. This is made possible through the Logical Block
Address (LBA) mode translation. Set the parameter to
Off
to disregard the
feature.
This parameter becomes nonconfigurable when the HDD Type parameter is set
to
Auto
.
Block Mode
This function enhanced disk performance depending on the hard disk in use. If
enabled, it allows data transfers in block (multiple sectors) by increasing the
data transfer rate to 256 bytes/cycle. However, if your hard disk does not
support this function, set this parameter to
Off
.
This parameter becomes nonconfigurable when the HDD Type parameter is set
to
Auto
.
Содержание AP5V
Страница 1: ...AP5V Mainboard User Guide...
Страница 13: ...Overview 1 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 20 19 18 17 16 27 26 25 24 23 22 21...
Страница 53: ...AMI BIOS Utility 3 13 The F000 and E000 addresses are exclusively shadowed for BIOS...
Страница 67: ...AMI BIOS Utility 3 27 3 3 Security Setup The Security window contains the password and anti virus features...
