AOpen AP5TC, Руководство пользователя

Страница: 42 / 100

Hardware Installation
2-25
There is no jumper setting required for the memory size or type. It is
automatically detected by the system BIOS. You can use any single side SIMM
and DIMM combination list below for BANK0/BANK1 or DIMM socket, and the
total memory size is to add them together.
Note that because TX chipset
limitation, the maximum is only 256MB.
SIMM1 SIMM2 Subtotal of
Bank0
SIMM3 SIMM4 Subtotal of
Bank1
None None 0MB None None 0MB
4MB 4MB 8MB 4MB 4MB 8MB
8MB 8MB 16MB 8MB 8MB 16MB
16MB 16MB 32MB 16MB 16MB 32MB
32MB 32MB 64MB 32MB 32MB 64MB
64MB 64MB 128MB 64MB 64MB 128MB
128MB 128MB 256MB 128MB 128MB 256MB
DIMM1 Size of DIMM1 DIMM2 Size of DIMM2
None 0MB None 0MB
8MB 8MB 8MB 8MB
16MB 16MB 16MB 16MB
32MB 32MB 32MB 32MB
64MB 64MB 64MB 64MB
128MB 128MB 128MB 128MB
256MB 256MB 256MB 256MB
Total Memory Size = Subtotal of Bank0 + Subtotal of Bank1
+ Size of DIMM1 + Size of DIMM2
For double side memory module, there is one limitation. This mainboard supports
only 4 RAS# (Row address latch) signals for DRAM control. They can only be
occupied by one DRAM module, they can not be shared.
The simple rule is: If
double side module at either Bank0 or DIMM1, the other must be empty
. If
you use at DIMM1, Bank0 must be empty.
Bank1 and DIMM2 have the same
limitation
.