AOpen AP43, Руководство пользователя

Страница: 62 / 89

AMI BIOS
User’s Guide
3-17
The screen below appears if your Chipset Setup Mode parameter
setting is
Engineer
. Take note of the new parameters that
replaced the Memory Speed (DRAM) and the Cache Speed (SRAM)
parameters.
See screens 2, 3 and 4 for the rest of the parameters.
This manual describes only the End-user
setting parameters.
Memory Speed (DRAM)
This parameter lets you set the DRAM speed. The supported DRAM
speeds are 70 ns and 60 ns. The default setting is
70 ns
.
Cache Speed (SRAM)
This parameter lets you set the SRAM cache speed. The supported
DRAM speeds are 15 ns and 20 ns. The default setting is
20 ns
.