16
9
、
Notes for installation and operation
➢
1. Installation
➢
（
1)Before the location and installation of the lamp, ensure the
stability of its installation point, which can hold at least 10 times the
weight of the lamp.
➢
(2) Installation method: use one piece of professional clamp, M13
bolts, and our own retaining screw to install; pull the safety chain
(distribution or owned) through the yoke or other hanging objects
and tighten the fixation screw. Check if there is any wear of the
safety chain and loosen of the clamp periodically. In addition, cut off
the power supply when remove the lamps to ensure safety. Take the
safety rope first, then remove the hanging, and pay attention to the
safety of pedestrians below.
➢
2. Notes:
➢
（
1
）
Do not frequently switch the lamp, so as not to affect the
service life of the bulb. Try to avoid the lamp to run for long periods
of time.
➢
（
2
）
All screws used for installing the lamp and any of its parts
should be tightly fastened to avoid the strong jarring or pounding.
Don
’
t use the lamp in a jittering situation.
➢
（
3
）
The order of power: When the lamp is in an energized state,
turn on the power of the console, otherwise it will cause serious
consequences.
