04
Operation
For veterinary use only
-
32 -
If the fuse has been melt, replace it with a new one.
Connect the power cord and turn ON the power switch, if the fuse is damaged again, turn OFF the power
switch, disconnect power cord, and contact AOHUA.
4.7.1.
Maintenance
AOHUA recommends that user and purchase unit conduct the maintenance activities to the imaging
processor by following the methods below daily.
Turn the imaging processor OFF and disconnect the power cord from the wall mains outlet.
Only use dry gauze to wipe the power switch, otherwise the switch may be damaged and electric shock
may result.
Use soft gauze moistened with diluted detergent to wipe the external of the equipment. When wiping the
rear panel, do not wet the power inlet and the USB ports. When wiping the front panel, do not wet the USB
port. Otherwise, damp circuit of the imaging may lead to electric shock and short circuit.
If the equipment is soiled with any liquid, wipe off all debris timely and dry it completely, especially the
electric circuit connection terminals.
4.7 Maintenance, storage and disposal of the imaging processor
⚫
Prior to cleaning, pull out the power supply cord and make it sure.
⚫
Ensure the power supply plug is dry to prevent electric shock accident from happening.
⚫
Do not wipe the power inlet or other terminals, damage to the imaging processor like distortion
or corrosion may result.
⚫
This equipment should be stored away from the direct sunlight, X-ray, radioactive ray or strong
electromagnetic radiation. Otherwise, damage to the imaging processor may result.
CAUTION
⚫
If any spare parts or electronic components of the endoscope imaging processor are broken,
please be sure to use the spare parts or electronic components provided by AOHUA. AOHUA
is not responsible for any damages caused by using spare parts or electronic components from
the other companies.
3
4
1
4
3
2
Содержание VET-OR1200HD
Страница 1: ......
