04
Operation
For veterinary use only
-
31 -
Press the power switch on the front panel to turn the imaging processor OFF.
Turn OFF other ancillary equipment.
If the equipment fails to function normally when the power switch is ON, the fuse may be damaged and
need to be replaced.
Confirm that the power switch is turned OFF the power cord is unplugged from the wall mains outlet and
the power inlet.
Press the cover on the fuse socket and draw the fuse holder out as shown in Figure 4.6.
(Figure 4.6)
4.5 Termination of the operation
CAUTION
⚫
Before disconnecting the endoscope, ensure that the imaging processor is turned OFF.
Otherwise, the sensor inside of the imaging processor may be damaged.
4.6 Fuse replacement (only for VET-OR1200HD,VET-OR1200R)
⚫
Confirm that the power cord is unplugged from the power inlet before fuse replacement to
prevent electric shock.
⚫
Never install a fuse that has not been approved by AOHUA or not fulfill the required
specifications. Damage to the imaging processor, malfunction, electric shock or a fire may
result.
1
2
1
2
Содержание VET-OR1200HD
Страница 1: ......
