AOHUA VET-OR1200HD, Инструкция по эксплуатации

Страница: 25 / 41

04
Operation
For veterinary use only
-
21 -
The white balance adjustment is used to display the correct image color on the monitor. Always adjust the white
balance in the following cases:
Before observation
Any irregularities observed on the color of the image
Check if the color of the endoscope image on the monitor is normal. If there is color deviation, the color
should be reset.
Insert the distal end of the endoscope into white balance cap; press the white balance button as described in
Section 4.4.3, “White balance adjustment”. The system will automatically perform white balance adjustment.
Dimmed white balance adjustment indicator and text information displayed on the monitor indicate successful
adjustment.
The panel buttons could realize the following functions:
−
Adjust the image display;
−
Perform the “Edge Enhancement”, “Hemoglobin Enhancement”, “Moiré remove” and other image processing
functions;
−
Freeze and replay image.
The displayed text information on the monitor shows the current status of the button functions.
4.3 Adjusting the white balance
⚫ Make sure that the endoscope and white balance cap are clean before adjustment.
CAUTION
⚫ Do not turn OFF the endoscope imaging processor or disconnect the endoscope until the white
balance adjustment is completed.
⚫ Do not allow other light to enter the white balance cap when adjust the white balance.
⚫ When adjust white balance, the distal end of the endoscope should be inserted into the white
balance cap.
4.4 Panel operation
1
2