AODE MACHINERY AWM-05, Руководство по эксплуатации и инструкция

Страница: 6 / 33

Aode Machinery Co., Ltd Page 5 of 26
奥德机械有限公司
2012
1.2
操作守则
Operation Regulations
1)
在操作之前，确信软质冷却水干净无污染物质
Before operation, make sure that soft cooling water is clean without Pollutants.
低质水会导致加热器烧坏，泵叶轮磨损，流量降低，泵浦漏水。
Using low quality water may cause the damage of heater and impeller of pump, to
decrease the flow rate and leakage of the pump.
2)
当机器运行时，不要轻易去移动。
Do not move the unit when it is in operation.
3)
如有需要机器修理，必须等水温降到
30
度以下之后。
When there’s need of repairing, we must wait for water temperature falling below 30
degree.
4)
在关闭泵浦之前，必须等水温降到
60
℃以下，否则会影响它的使用寿命。
Before shut off the pump, must wait until water temperature falls below 60
℃
. Otherwise
The service life of the unit would be affected.
5)
为保证控制温度稳定，冷却水压力应该在
1-3kg/cm
2
.
In order to keep stable water temperature, cooling water pressure should be at
1~3kg/cm
2
.
6)
在开机前，请确认电源已经接好且电源规格与机器名牌相符合
.
Before starting the machine, pls check the connection of power wires and confirm the
power spec be corresponding with the unit nameplate.
7)
在开机前，请确认机器进出口等阀门已经开启
.
Before starting the machine, pls check the in/outlet valves of unit be open.