Model
50L31
Document No.
ITCT0221
Version
v5.0
Panel
V500HJ1-LE1 Rev.Cx
Effective from
2013-9-10
Date Updated
2013-9-10
NO
Amount
Diagram
Tool Parameters
1
7B11-0406D6-00105111
5
Figure 1
Electric screwdriver
2
5
±
1kgfcm
3
4
5
Prepared by
Reviewed by Approved by
Zhang Wei
Φ
4
×
6mm round-head black-zinc-plated machine
screw
Fasten back cover and surface frame together with 5PCS screws.
Operations and Requirements
Section/Serial No. Unit Assembly 21
Station Name
Back Cover Locking-B
Recent
Modification
Record
Figure:
Part Number
Descriptions
2. Install screws by the serial number (install one by one) and abnormalities such as screws being neglected, tilted and slipped are not allowed.
When finished, step on the switch with foot and send the product to
next station.
Notice
1. Wastes produced by this station shall be placed in the assigned position. Refer to
Waste Classification and Disposal List
.
Project Controlled Seal
Please read and understand the
operating instructions carefully
Take only
one screw
at a time
21
Process Requirements:
1. Check for rusted screws, missing
slots or bad cross slot.
2. Check if the electric screwdriver
torque force is within the specified
requirements.
3.When installing screws, align the
electric screwdriver and the screw to
the screw hole vertically (do not tilt).
4. In the process of installing screws,
properly exert pressure to make a close
contact between electric screwdriver
and screw slot to avoid slipped screw.
5. Put the defective screws in the
defective product box and do not
throw them at will.
4
1
2
3
5
Figure 1
Содержание LE50H264
Страница 27: ...Operation Instructions ...