AOC LE50H264, Руководство по техническому обслуживанию

Страница: 37 / 53

Model 50L31 Document No. ITCT0207 Version v5.0
Panel
V500HJ1-LE1 Rev.Cx Effective from
2013-9-10
Date Updated
2013-9-10
NO
Amount
Diagram Tool Parameters
1 7131-320L1B-42F20023 1 32L11N adapter plate bracket C1 (2012-11-07)
Figure 1
Electric screwdriver
2
7119-420L31-42E20011
1
Figure 1
4 ± 1kgfcm
3
7B11-030696-00101111
3
4
5
Prepared by Reviewed by Approved by
Zhang Wei
Φ
3
×
6mm B-head nickel-plated machine screw
Section/Serial No. Unit Assembly 07
Part Number Descriptions Operations and Requirements
Station Name
Mainboard Bracket Locking
1. Wastes produced by this station shall be placed in the assigned position. Refer to Waste Classification and Disposal List .
2. Install screws by the serial number (install one by one) and abnormalities such as screws being neglected, tilted and slipped are not allowed.
Place mainboard bracket and lower bracket to panel as illustrated.
Figure:
Fasten brackets to panel back with 3PCS screws.
When finished, step on the switch with foot and send the product to
next station.
Notice
42L31 mainboard bracket
Project Controlled Seal
Recent
Modification
Record
Please read and understand the
operating instructions carefully
Take only
one screw
at a time
7
Process Requirements:
1. Check for rusted screws, missing
slots or bad cross slot.
2. Check if the electric screwdriver
torque force is within the specified
requirements.
3.When installing screws, align the
electric screwdriver and the screw to
the screw hole vertically (do not tilt).
4. In the process of installing screws,
properly exert pressure to make a close
contact between electric screwdriver
and screw slot to avoid slipped screw.
5. Put the defective screws in the
defective product box and do not
throw them at will.
Figure 1