41
USING LEARNING
This universal remote control includes a Learning feature (some models may not include Learning) so you can add functions that are unique to
your home entertainment devices (e.g.,VCR Tracking Up or Down). However, there are some considerations.
Learning Precautions
Your original remote controls must be in working order for learning to work properly.
Learned keys are mode-specific, so each one can store a unique function for each mode.
Do not use the following keys for learning: Device Keys, SET, or Record (•).
Learning capacity is approximately 42 to 75 keys, depending on the code being learned.
Certain device functions are not learnable including multi-frequency types, some high frequency functions, and other unusual formats.
For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.
NOTE: Please have your original remote controls handy before programming learning.
Programming a Learned Key
NOTE: If more than 10 seconds pass between key presses, the remote exits pro-gramming.
Place the Nova head-to-head (about 2” apart) from your original remote control. Also locate the key (on your original remote control) that you
1.
want the Nova to learn. Press the mode key you wish to learn functions on.
Press and hold SET until the LED blinks twice, then release.
2.
Enter 9 7 5. The LED blinks twice.
3.
NOTE: If the LED displays one long flash instead, either your batteries are low, or the Nova has a memory fault. In either case, the remote
cannot learn a new key.
Press the key on the remote you wish to learn onto. The feedback LED stays lit for three seconds, suggesting the remote is ready to learn.
4.
On the original remote, press and hold the key to be learned. Continue holding the key on the original remote until the Nova’s LED blinks
5.
twice.
NOTE: If the red LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs.
If the function is still not captured, press and hold SET to exit programming and review the “Learning Precautions” above. If needed, also see
“Trouble-shooting” below. After reviewing, start programming again at step 1.
Repeat steps 4 through 5 for another key you would like to learn onto. Once you have completed learning all keys, press and hold SET until
6.
the LED blinks twice to save all data learned.
Deleting a Single Learning Key
This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a
different function to the key (see “Programming a Learned Key”).
NOTE: If more than 10 seconds pass between key presses, the remote exits pro-gramming.
Press the mode key that you wish to remove the learned key from.
1.
Press and hold SET until the LED blinks twice, then release.
2.
Enter 9 7 6. The LED blinks twice.
3.
Press the key containing the learned function to be deleted twice. The LED blinks twice and exits from programming.
4.
Deleting All Learned Keys in a Specific Mode
NOTE: If more than 10 seconds pass between key presses, the remote exits programming.
Press and hold SET until the LED blinks twice, then release.
1.
Press 9 7 6. The LED blinks twice.
2.
Press a mode key twice (i.e., TV, DVD, STB, or AUX) to clear all the learned keys for that mode. The LED blinks twice and exits from
3.
programming.
CHANGING VOLUME LOCK
The AOC universal remote control comes preset to allow independent volume control of each selected device (Global Volume Unlock). However,
you may change the Volume Lock setting to Global Volume Lock so that one device’s volume controls volume in all other modes. After that,
you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation or Global Volume Unlock to
remove all volume locking.
Locking Volume Control to One Mode (Global Volume Lock)
Press and hold SET until the red LED blinks twice, and then release.
1.
Enter 9 9 3, the LED blinks twice.
2.
Press the mode key for the device you want to control (for example, TV).
3.
The LED blinks twice. Now when you press VOL+, VOL-, or Mute, the selected device (for example, TV) controls the volume regardless of
4.
the current mode.
Unlocking All Volume Control (Restoring Global Unlock)
Press and hold SET until the red LED blinks twice, and then release.
1.
Enter 9 9 3, the LED blinks twice.
2.
Press VOL+. The LED blinks four times. Volume is independently controlled for all programmed devices.
3.
Unlocking a Single Device’s Volume Control
Press the desired device mode key (TV, DVD, STB, or AUX).
1.
Press and hold SET until the red LED blinks twice, and then release.
2.
Enter 9 9 3. The LED blinks twice.
3.
Then press VOL-. The red LED blinks four times. Volume is independently controlled for the selected devices.
4.
