Anywave ATSC 1.5KW, Руководство пользователя

Страница: 45 / 76

ATSC 1.5KW DTV TX User Manual
ACT-1500-USR-DOC-V1.4 09/12/2014 Page 45 of 76

VSWR: Voltage Standing Wave Ratio

REJT: This is the system Reject Load Power Meter, derived from the REJT Load
feedback sample. Displayed in units of “W” and cannot be changed.

Status Bar : During normal operation, the default status is “RUNNING OK”. If there is
any alarm, the alarm will show up in the Status Bar of each screen. Please see the
Troubleshooting Guide – section 16 – of this manual for help in understanding and
resolving alarms.

Block Diagram : Press the “Exc A/B” graphic to navigate to the Dual Exciters Switching
screen (shown below). This screen shows which exciter is currently on-air (highlighted
GREEN) and allows you to manually change the on-air exciter. Press the “Amplifier”
graphic to navigate to the home Amplifier Status Screens (shown below).
13.2 A/B EXCITER ICON SCREEN
Dual Exciters - Switching Screen : As mentioned above, pressing the “Exc A/B” icon will bring
you to the Dual Exciters Switching Screen, as shown below.