Anywave ATSC 1.5KW, Руководство пользователя

Страница: 24 / 76

ATSC 1.5KW DTV TX User Manual
ACT-1500-USR-DOC-V1.4 09/12/2014 Page 24 of 76
11 AC Mains Connections
Please review the safety WARNINGS on page 4 of this manual before proceeding
with any electrical work.
A licensed Electrician is required to properly and safely connect the 208V or 220V
power cable from your stations electrical panel to the terminal block located inside the
TX AC Mains Distribution compartment in compliance with local electrical and
building codes. Please note: a power cable is not provided with the Transmitter system
and should be obtained via your local Electrician.
Be sure the Main Breaker on the lower left front of the TX is turned OFF before
performing any electrical work on the TX (as shown below). Also, please be sure to
reference the correct wiring diagram below for your particular system, 208VAC 3-phase
or 220VAC Single-phase.
Main Breaker OFF