Anywave ATSC 1.5KW, Руководство пользователя

Страница: 36 / 76

ATSC 1.5KW DTV TX User Manual
ACT-1500-USR-DOC-V1.4 09/12/2014 Page 36 of 76
Normal operation for the 1.5KW TX is to run with the Transmitter AGC enabled
to compensate for slight variations in output power due to changes in
temperature, AC mains, etc. It is not recommended to perform power meter
calibration with AGC enabled.
1. Please navigate to the Controller AGC screen (by pressing the CONFIG
button and then AGC button) and disable AGC by pressing the Green
button (as shown below), so that the button then becomes transparent
(blue). This indicates that AGC is OFF.
2. Adjust the Exciter POWER setting under the RF submenu to achieve the
desired Forward System Power (1500W for example) as monitored on the
Controller Home screen.
Press AGC button to
turn AGC OFF
(button becomes
transparent = blue)
System FWD
power meter