31
8
Microphone Operation
Send dtMF SiGnAlinG
MAin/Sub bAnd SwitchinG
Function opeRAtion thRouGh pA-pd keYS
You can operate the transceiver by keypad or input desired frequency
and channel through the QHM-05 microphone.
Hold the PTT key; input the desired DTMF signaling by the numeric keys.
This transceiver is defaulted on dual receive, in this status, a MAIN icon
will display in the top right corner of the Main band frequency,transmitting
is only available on the Main band. In standby, you can switch Main band
and sub band by the A/B key.
This function is valid only when current channel set with offset frequency.
PRI
：
Add or delete priority channel: In
channel mode, press the key programmed
as PRI function to set priority channel, when the LCD displays the
current channel is set as priority channel. repeat above operation, the
disappear, the curent channel is not set as priority channel.
LOW
: Output power setup, in standby, press the key programmed as
as LOW function will change the power level.When LCD displays HIGH,
the transmitting power on current channel is high. When LCD displays
MID1, the transmitting power on current channel is middle1, When LCD
displays MID2, the transmitting power on current channel is middle 2.
When LCD displays LOW, the transmitting
power on current channel is low.
TONE
: CTCSS/DCS code setup. In standby,
press the key programmed as TONE function will be able to setup
CTCSS/DCS code.when the LCD displays "ENC" and CTCSS frequency,
press the [ UP/DOWN ] key to choose CTCSS encode. When the LCD
displays "ENC","DEC" and CTCSS frequency,press the microphone
[ UP/
DOWN ]
key to choose CTCSS decode. When the LCD displays "DCS"
and DCS code, press the microphone
[ UP/DOWN ] key to choose DCS
code.
MHZ
: In VFO mode, press the key programmed
as MHZ function, the megabit digital in the LCD flashes, now turn the
channel knob or microphone [ UP/DOWN ] key to adjust frequency by
1Mhz step. In channel mode, press this key, the channel number flashes,
now adjust selector knob or microphone [ UP/DOWN ] key to adjust
channel.
The PA,PB,PC,PD, keys are programmable, they can be endowed with
the following functions.
RPTR:
OFFSET direction setup, in standby,
press the key programmed as RPTR function
will change the offset direction. when LCD displays"+", means plus offset,
when the LCD displays"-", means minus offset.
NOTE
PTT
Main/Sub band switch
UP
DOWN
MIC
Numeric Keys
UP/DOWN lock key
Microphone speaker
www.at-5888uv.com
