24
General Setting
7
41
Switch the Main band selector knob to choose wanted value.
ON:
Frequency Reverse is turn on, The TX and RX frequency will be
exchanged, the CTCSS DCS signaling also will be exchanged if
existed in current channel.
OFF:
Turn off Frequency Reverse.
Press the Main band selector knob or
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Press
11
to enter function menu
Turn the Main band selector knob to choose NO27 menu, The
21
LCD displays "HYPER"
Press the Main band selector knob to
31
enter function setup.
51
To avoid the receiving of sub band disturbing the communication of the
main band, you can turn on this function. The RX of the sub band will be
mute during the RX or TX of the main band.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No 25 menu. The LCD displays "
MUTE
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
TX:
When the Main band is transmitting, the sub band receiving will
be mute.
RX:
When the Main band is receiving, the
sub band receiving will be mute.
RX/TX:
the sub band receiving always mute.
Press the Main band se
51
lector knob or
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Sub bAnd Mute Setup
editinG chAnnel nAMe
After edit a name for a channel, if the display mode is channel name,
the will display the name edited in this menu. Otherwise it will display the
frequency.
Press
11
key to enter function menu.
Switch the selector knob to choose NO 26
21
function menu, the LCD displays "
NAME C
".
Press the Main band selector knob to enter function setup.
31
Switch the selector knob to choose
41
wanted character.
Press the selector knob to confirm current character and start edit
51
next character, after editing all 7 characters, press the selector knob
to confirm and back to function menu.
If the editing not reach 7 characters, press
61
key back to function
menu, then press
key or hold selector knob for over 0.5 second
to store setup and exit.
chAnnel Function Auto StoRAGe Setup
This function is used to store lastest setup for each single channel.
when this function is on, all the latest temporary operation for present
channel will be stored no matter change channel or power off radio.
when this function is off, the temporary setup will not be stored, the
channel informaiton will resume to the last stored value after change
channel or power off radio.
www.at-5888uv.com
