21
General Setting
Compander function will decrease the background noise and enhance
audio clarity, especially in long range communication.
Press
11
key to enter function menu
Turn the Main band selector knob to
21
choose No 17 menu. The LCD displays "
COMP
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
ON:
Compander function is turn on
OFF:
Compander function is turn off
Press the Main band selector knob or
51
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
This special audio process can offer a more confidential
communication;other radio with same frequency will receive only
disordered noises.
This function uses to start repeater .It needs certain intensity Pilot
Frequency to start a dormant repeater. As usual, no need to send pilot
frequency again once repeater started.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No 19 menu. The LCD displays "
TBST
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted frequency.
41
1000:
Pilot Frequency is 1000Hz.
1450:
Pilot Frequency is 1450Hz.
1750:
Pilot Frequency is 1750Hz.
2100:
Pilot Frequency is 2100Hz.
coMpAndeR
ScRAMbleR Setup
tone buRSt (pilot FRequencY)
Press the Main band selector knob or
51
key to store value and
back to function menu. Press
key or hold selector knob for
over 0.5 second to store setup and exit.
When using compander, to avoid distortion during communications, both
radios need turn on this function.
Only when the transceiver is set with CTCSS/DCS or optional
DTMF/5TONE/TONE signaling, the values will be available.
To enable communication with scrambler, 2 transceivers shall set with
same group.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No 18 menu. The LCD displays "
SCR
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted group
41
1-9
(9 fix groups)
U1,U2
(2 self defined
scrambler groups),OFF.
Press the Main
51
band selector knob or
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
7
NOTE
NOTE
NOTE
www.at-5888uv.com
