AnyTone AT-3318UV, Инструкция по эксплуатации

Страница: 34 / 70

25
SHORTCUT OPERATIONS
TX Power selection
Under standby state, press key, the top left corner of LCD displays " " icon,
then press key to choose High/Low power for current arrow directed channel.
When LCD displays "
1.
L " icon, it means low power is chosen.
When LCD displays "
2.
H " icon, it means high power is chosen.
Talk Around function
Under standby state, press key, the top left corner of LCD displays " " icon,
then press , the arrow directed channel will enable talk around, repeat the
above operation to close talk around.
TX=RX:
1.
Enable talk around, current channel transmit at RX frequency, if CTCSS/
DCS signaling is set, it will interchange decoding CTCSS/DCS as encoding.
OFF:
2.
Close talk around.
if CTCSS/DCS signaling is set, it will also interchange.
When "
2.
R " icon disappears, it means reverse function is close.
DTMF code Transmit and Enquiry
Press
1.
key, the top left corner of LCD displays " " icon, then press key, LCD displays
DTMF data and group number (total 16groups) of current group.
Rotate channel switch to choose desired group and DTMF data, press PTT key
2.
to transmit selected DTMF signaling. If current group not edit DTMF data, LCD