AnyTone AT-3318UV, Инструкция по эксплуатации

Страница: 15 / 70

06
How to Charge
Plug the AC adaptor into the AC outlet, then plug the
1.
cable of AC adaptor into the DC jack, the indicator
lights orange for 1s and turns into GREEN---waits to
charge.
Slide the battery or transceiver with battery into the
2.
charger; make sure the battery terminals are in contact
with the charging terminals. LED turns into twinkling
RED---pre-charging begins.
Pre-charging for about 5 minutes, LED twinkles stop
3.
then charging begins.
It takes about 4 hours to fully charge the battery,
4.
when LED turns into GREEN— full charged.
BATTERY INFORMATION
WARNING:
When keys, coins, ornamental chains and other conductive metals make contact with the battery terminals,
the battery may cause fire or physical harm. If the battery terminals short circuit, it will generate a lot of heat
and possible fire, so please be careful when you handle or use the battery, please store battery and/or radio
in an insulated container. Do not put it into a metal container.
Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger.
▲
Ac Input