AnyTone AT-3318UV, Инструкция по эксплуатации

Страница: 12 / 70

03
This transceiver is a high performance amateur transceiver with dual band, dual standby, dual display and
other functions. Depending on your need, you can set the radio to operate as an Amateur Transceiver or
Professional Transceiver. There are 3 levels of operation menu to set functions as you need. It is easy and
convenient.
Operation Mode:
1.
By programming software: A. In PC software's "General Setting" menu to
choose "Display Mode", channel mode works as Professional transceiver,
other two modes as Amateur transceiver.
By manual setup: B. Please refer to "Display Mode" in Page 42.
Amateur Transceiver Mode:
2.
Except setting as CH mode, others considered
as Amateur transceiver mode. Under this mode, press key to switch
between Channel mode and VFO .
Fre Channel mode: A. At this mode, When set display as "FREQ", it
enters into FrChannel mode, new setting of channel operation and
shortcut operation can be temporarily used by user. Once the radio is turned
off or switched to another channel, the temporary setting will be erased and
back to initial settings.(As pic 1)
Name Tag Mode: B. When set display as "NAME", it enters into
Name Tag Mode. At this mode, it will display corresponding
channel name when the current channel is edited with name. Otherwise, it
will display fre channel. Its operations are the same as fre
channel mode. (As pic 2)
OPERATION MODE (AMATEUR TRANSCEIVER OR
PROFESSIONAL TRANSCEIVER)
(Pic 1)
(Pic 2)
(Pic 3)
(Pic 4)