ANYTEC A27 CAB, Руководство пользователя

Страница: 65 / 88

4. SYSTEMS & COMPONENTS __PAGE 57
1. Anchor
2. Anchor holder
3. Windlass (inside sofa storage)
For complete instructions on operation and maintenance, we refer to the separate OEM
owner’s manual that was developed specifically for this equipment. It is provided with the
Anytec document bag.
4.13 B
OW THRUSTER
(
OPTIONAL
)
Your boat may come equipped with a bow thruster which helps you to better maneuver
at low speeds. The bow thruster is placed below the waterline which opens at both sides
of the boat, near the bow. The thruster sucks water from one side and throws it out at
the other side of the boat, thus pushing the boat bow sideways.
To activate the thruster, first turn on the thruster remote battery switch, located at the
helm. This switch connects the thruster battery with the thruster motor, and should
only be turned on while using the thruster. A joystick controls the thruster, refer
chapter 3.11.
The maximum continuous usage time of the electrical thruster is approximately 2-3
minutes to avoid overheating. The electromotor has a built-in thermal cut-off switch
which shuts the electromotor off, if it is overheating and re-engages it when it has cooled
down. This should be considered when planning your maneuvering.
1
2
3