ANYTEC A27 CAB, Руководство пользователя

Страница: 56 / 88

4. SYSTEMS & COMPONENTS __PAGE 48
1
3
3
2
All components of the steering system must undergo periodic inspection & maintenance to
ensure safe operating conditions. Refer to the maintenance section of this manual for further
details.
For complete instructions on operation and maintenance, we refer to the separate
OEM owner’s manual that was developed specifically for this equipment. It is provided
by the party who installed the engine.
4.3 N
AVIGATION LIGHTS
Your boat comes equipped with navigation lighting for use at night or in low visibility
conditions. The use of navigation lights at low visibility conditions is mandatory in most
countries and waters; it is always important for your own, as well as other’s safety at sea.
Local regulations may vary.
The navigation light switches are located at the dash switch panel.
To turn on the Navigation Lights, press “Navigation lights” button (see chapter 3.11).
This illuminates the port (red), starboard (green) and all-around light (white) showing
other vessels that you are underway.
There is a separate button to activate the Anchor light. If activated, only the white all-
round light turns on.
To turn off the Navigation Lights, press “Navigation lights” or “Anchor light” buttons
again.
Before running at night, make sure that all navigation lights are working well.
Principal figure only
1. 112.5 ⁰ Port navigation light (red), visible 2NM
2. 360 ⁰ All around light (white), visible 2NM
3. 112.5
⁰
Port navigation light (green), visible 2NM
CAUTION