ANYTEC A27 CAB, Руководство пользователя

Страница: 80 / 88

6. MAINTENANCE__PAGE 72
CAUTION
NOTE
WARNING
CAUTION
NOTE
Do not apply any paint to zinc anodes, log sensor or trim tabs. Do not apply paints or
lubricants including copper on aluminum parts. Always follow the instructions of paint
manufacturers.
Type of antifouling paint allowed may vary by region and country, always check local
regulations.
6.2.3 Anodes for prevention of galvanic corrosion
One of the most important maintenance tasks when owning a boat is making sure you
protect the hull and engine from electrolytic corrosion. This can otherwise quickly
create serious damages. Anytec boats are therefore equipped with sacrificial anodes,
made from zinc, which is designed to corrode instead of the boat and the engine. They
are mounted at the bottom recess (see figure).
The anodes must be inspected annually and renewed if more than 50% is wasted. It is
important to inspect the working surface of the sacrificial anode to ensure that it is free
of paint and chalky corrosion deposits and particularly very important on the contact
surface between the anode and the hull.
Your engine is likely also equipped with anodes that need to maintain, refer engine
manual for further details.
Neglect to replace the boat zinc anodes in time can cause major damages to the boat hull and
engine!
Do not apply any paint to zinc anodes, and ensure that the surface between the anodes and
the hull is metal clean when replacing and inspecting the anodes.
Several zinc anodes may be mounted directly on engine. Please contact the manufacturer or
dealer to check the replacement time of these anodes.