31 |
ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710)
ANYLOAD 805HP Handheld Digital Weighing Indicator User’s Manual (V1710)
| 32
Max. Capacity Temp. Drift
Max. Display Resolution
Min. Input Sensitivity
Input signal range
Load cell Excitation
Voltage
Power Supply
Display:
Display
Sampling Frequency
Display content
Units of Measurement
Enclosure material
IP Rating
Ports
Functions:
Overload protection
User-selectable overload warning value and
alarm value.
Overload warning and alarm can be enabled or
disabled.
Overload alarm peak records can be reviewed.
±
3ppm /
℃
Max
1 / 10,000
0.3
μ
V / e
0mV ~
±
25mV
1.22Vdc
3 x AA 1.5V alkaline batteries
6-digit panoramic FSTN LCD with LED back light
4.17 / 6.25 / 8.33 / 10 / 12.5 / 16.7 / 33.2 / 50 / 62 /
123Hz are user-selectable.
Display can show a positive or negative number,
and decimal point can be selected to any position.
kg / lb / t / g / oz / klb / N / kN / are user-selectable
units. Measurements units can be enabled
independently and switched. The default unit can
be selected.
ABS
IP65
RS-232C (optional)
RS-232C (optional)
Functions
21 set-points calibration, Zero scale, Tare, Low
battery warning, Peak-hold.
Power-down storage
Power-saving
Date can be saved after power-off.
Date can also be saved after removing batteries.
If inactive for a period of time set by user, the auto
power-saving mode will activate.
If inactive for a period of time set by user, the auto
power-off mode will activate.
Functions:
Zero
Tare In / Tare Out
Hold
Low Voltage Alarm
Battery Supervision
Overload Alarm / Record
Calibration
Digital Calibration
Unit Switch
Gravity Acceleration
Switch
Tare set
Total / Delete / Clear Total
View Total
Resolution Switch
Auto- Off Set
Idle Set
Tare Range
Zero Range
Yes
Yes
Yes (with Peak Hold)
Yes
Yes
2 Alarm Set Point (Lower and Higher)-records
overload
2-set-points calibration is required for linearity
correction
Yes
kg, g, t, lb, Klb, N, kN, oz, User’s defined unit
Yes
Yes
Yes
Yes
Yes
Yes
Yes
100% F.S.
4% F.S.
®
®
