ANVL BOARDS
Visit www.anvlboards.com for instructional videos
Reassembly:
Place the back edge of
the frame first (a), then snap together
towards (b).
Reassembly:
Press both sides of the
frame to seal shut.
Reassembly:
Replace screws.
Reassembly:
Replace Neck Pin and
replace screw.
Reassembly:
Make sure that a total of 16
bearings sit at the bottom of the outside
rim. Bring inside rim over the bearings
(fig.6) and hold in place as you turn over
the wheel and allow the bearings to go
around the rim.
Reassembly:
Place assembly flat. Use
tool and arrange the bearings evenly
and snap into bearings retainer, one
by one, using the tool to position the
bearings.
WARNING: Your Skatecycle warranty may be voided by improper or incorrectly performed maintenance or repairs. It is strongly recommended that servicing and repairs
be handled by a qualified bicycle mechanic.
8
9
10
11
12
7
Содержание Skatecycle
Страница 1: ...Skatecycle Instructions...
