background image

    ANVL BOARDS                   

 Visit www.anvlboards for instructional videos

!

Step 1: 

Work out which foot you will be 

leading with.  Have the Skatecycle on 
the floor tilted away from you, and 
place your back foot on the back plat-
form, pointing slightly outwards, with 
your foot centered on the platform. 

Step 2: 

Do the same with the front foot 

and press down on the front platform 
to level it so you can balance while 
standing still. 

Step 3: 

Push off by pressing your 

weight on your back foot, then shifting 
your weight quickly towards your 
front foot while simultaneously rais-
ing the back platform to level.  Alter-
nate between pointing your feet in-
wards and outwards to gain momen-
tum and balance.  Add upper body 
movements from the next page. 

Step 4: 

Keep your arms out to main-

tain balance until you push off (step 3 
above) 

Step 5:  

Keeping your arms stretched 

out, turn your toes outwards as you 
twist your upper body to swing your 
leading arm behind you (outwards). 

Step 6: 

Keep your arms straight and 

twist your upper body so your leading 
arm and body goes inwards as you 
turn your toes inwards.  As you get 
better you will not need to keep your 
arms out to propel forward.

Содержание Skatecycle









Отзывы: