Anviz OA1000 Mercury, Руководство пользователя

Страница: 27 / 101

User Manual
20
[Communication.]: There are four types: Net(Server), Net client, RS485 and
RS232,GPRS.
[Real-time monitor]: This function must be active while real-time collecting data from
terminal and real-time monitor form the terminal;
[Retrieve IP mode]: There are two modes:
Static User set a fixed IP address for the time attendance devices.
Autom
atic
Net card get the IP address from rout
er automatically, user needn‘t set it again;
[Network Interface]: There are two types:
RJ45 Connect the computer and attendance device with NET cable for communication;
WIFI Connect the device with wireless network for communication;
[Server IP]: To communicate with the attendance of the computer IP address.
[Device IP]: The machine‘s IP address.
[Subnet Mask]: According to the actual network environment settings subnet mask.
[Gateway]: Attendance required for connection to the Internet gateway IP.
Set the type of communication system and related parameters, done, press [ESC] key to
save and return to the previous menu.
Note: Attendance set a variety of communications. See Chapter VII of the
communication connection settings.
2.3.6.3 Mode
This function sets up
user‘s identification method.
In [Main

Advanced] menu, press [

] key to select [Mode] option and press [OK] key to
enter [Advanced

Mode] interface:
[FP verify first +]: The response of the device when the user first time use finger printer
comparison on the device.
There are four modes:
1) [FP + No response]: This mode means the machine without response after FP
identified;
2) [FP + Password identify]: This mode means need input password after FP identified;