Antunes VCTM-2, Руководство пользователя

Страница: 8 / 24

VERTICAL CONTACT TOASTER
8
P/N 1011373 Rev. C 03/18
McDonald’s
Viewing Settings
To view the toaster settings press and hold the Menu
button (Figure 4) for approximately 5 seconds. The unit
beeps and shows the settings in the following order,
displaying the value in column 1 first, then the actual
setting.
Display Shows Setting Description
º A - ° F A Platen current temperature*
b º - ° F B Auxiliary heater current tempera-
ture*
SPEd Speed of belts
Unit Current temperature Unit
Er Error Code
Et - d Elapsed Time of toaster usage
Int ° F Internal toaster Temperature
PL Power Line Voltage
* The first circles shown in these values represent the
Platen indicator lights. The temperature unit will be
shown as
° F
or
° C
depending on the Unit setting.
Changing Settings
The only settings that can be changed on the toaster
are:
• A Platen setpoint temperature
• B Platen setpoint temperature
• Speed
• Unit
To change these settings, follow these steps.
1. With the toaster turned off, press and hold the
Menu button and turn the toaster on. Continue
holding the Menu button until the unit beeps and
EnA appears on the display. Release the Menu
button.
2. Press the Menu button again. The toaster shows
ºA - ° F (A Platen) and then shows the current A
Platen setpoint value. Use the ▲ and ▼ buttons
to change the value as needed.
3. Press the Menu button to move to the B Platen
setting. Edit as needed.
4. Press the Menu button to move to the SPEd
(Speed setting). Edit as needed.
5. Press the Menu button to move to the Unit set-
ting. Edit as needed.
OPERATION (CONTINUED)
Hi-Limit Reset Button
A Hi-Limit Control turns off power to the unit if it over-
heats. To reset the control, allow the unit to cool, then
locate the Reset Button at the rear of the unit. Remove
the black protective cap, press the Reset Button, and
reinstall the protective cap (Figure 3).
NOTE: If the Hi-Limit requires continuous resetting,
contact Antunes Technical Service.
The settings are saved each time you press the Menu
button and move to the next value. The toaster exits
programming mode after 30 seconds of inactivity.
Factory Reset
To reset the toaster to the original factory settings:
1. Turn the toaster off.
2. Press and hold both the ▲ and ▼ buttons and
turn the toaster on, continuing to hold the ▲ and
▼ buttons until the unit beeps and FR (Factory
Reset) appears on the display.
3. Release the buttons.
Figure 4. Control Panel and Display
Display
Down Arrow
Button
Up Arrow
Button
Menu
Button