10
P/N 1011309 Rev. B 04/17
CLEANING THE FANS
Top Fan Cleaning
1. Turn the toaster off. The unit
enters a 20 minute cool down
mode and displays OK to Clean
when complete. The fans and
conveyors continue to run. The
cleaning mode continues for 20
minutes and shuts the unit down
automatically when complete.
NOTE:
Be sure to wait until the unit
shuts down before proceeding.
2. Facing the rear of the toaster,
remove the three screws
circled in the image below
with a Phillips head screw-
driver. Set the screws aside.
3. Rotate the Top Rear panel
down to gain access to
the top cooling fan.
4. Clean the cooling fan with a
small plastic brush or a clean
dry cloth. Be sure to remove all
debris from the fan blades.
5. Close the Top Rear panel and
secure with the 3 screws.
6. Wipe the exterior portion
of the top fan with a clean,
damp towel. Make sure the
fan opening is clear of any
debris or obstructions.
Bottom Fan Cleaning
1. Refer to the image below.
Remove the top circled screw
and set aside. Then, loosen
but do not remove the 2
bottom circled screws.
REMOVE THIS
SCREW
LOOSEN THESE
SCREWS
2. Lift the Rear Door to open (im-
age below) and then lift up the
Bottom Rear panel and rotate it
so the bottom fan is accessible.
3. Clean the bottom cool-
ing fan with a small plastic
brush or a clean dry cloth.
Be sure to remove all de-
bris from the fan blades.
4. Place the Bottom Rear panel
back into place, close the Rear
Door, and secure the Bot-
tom Rear Panel with screws.
5. Wipe the exterior fan opening
with a clean, damp towel. Make
sure thee the fan opening is clear
of any debris of obstructions.
Содержание 9210906
Страница 18: ...18 P N 1011309 Rev B 04 17 WIRING DIAGRAM ...