Antunes 9210875 Скачать руководство пользователя страница 8

Страница: 8 / 20

P/N 1011190 Rev. G 01/17

7. Re-engage the Upper Belt Frame

Lock by lifting up and then locking

it in place on the Front Conveyor

Assembly.

8. Close and latch the Side Panel.

NOTE:

Inform the Store Manager after

any Belt Replacement so new

Belts can be ordered. To obtain

new Belts, contact the factory at

1-877-392-7854 (North America

only) or 630-784-1000.

9. Set the Compression Knob from 7

to 4.

10. Re-install the Front and Rear

Conveyor Covers and then the Bun

Feeder Assembly.

11. Plug in the toaster and test the unit

before returning to service.

Cleaning the Top Cooling Fan

and Electrical Housing (Annually)

Follow these steps to clean the top fan.

12. Turn the power switch to the OFF

position. The toaster enters a cool-

down mode and will automatically

shut down when complete.

13. Unplug the power cord.
14. Facing the front of the toaster,

move to the right Side Panel.

Remove the right Side Panel and set

aside. Do not lose the screws.

15. Remove the Fan Duct cover from

the top of the unit and set aside. Do

not lose the screws.

16. Use a plastic brush or similar tool to

brush all 5 fan blades from above

and below. Be sure to remove all

debris.

17. Carefully clean any debris from the

inside floor of the control compart-

ment and from all electrical connec-

tions. Be sure to remove any grease,

lint, or debris from these areas.

18. Reattach the right Side Panel

and Fan Duct cover securely with

screws.

Содержание 9210875





















Результаты поиска

Содержание 9210875

Отзывы:

Бренды по названию

Популярные бренды

Antunes 9210875, Руководство пользователя

Результаты поиска

Содержание 9210875

Отзывы:

Бренды по названию

Популярные бренды