Antunes 9210840, Руководство пользователя

Страница: 7 / 24

HEBT-5V BUN TOASTER
7 P/N 1011112 Rev W 05/22
McDonald’s
Club Platen OFF units (Mfg. # 9210844)
Units with Manufacturing Number 9210844 are shipped with
the Club Platen off. Follow these steps to turn the Club Platen
on:
NOTE: This applies ONLY to units with manufacturing
numbers 9210844 & 9210847. All other units are
shipped with the Club Platen turned on.
1.
With the toaster on, p
ress and hold both the
LEFT
and
RIGHT
arrow buttons for 5 seconds until “
Factory
Settings Restored
” appears on the display (Figure 1).
NOTE: This sets the unit to display temperatures in
degrees Celsius (°C).
2. The unit enters Cool Down mode.
3. Turn power switch off and then back on again.
4. The Club Platen is now operational. Allow the unit to
warm up before using.
5. If you want the unit to display temperatures in degrees
Fahrenheit:
a. Press and hold the MENU button for five seconds
(Figure 5). The control panel displays “A Platen.”
b. Scroll to “Units” with the LEFT or RIGHT arrow
buttons. Press the OK button
c. Scroll to “° F” (Fahrenheit) with the LEFT or RIGHT
arrow buttons. Press the OK button.
NOTE: The “C Platen” remains active if the unit is reset
to factory defaults at any time after performing
these steps.
Arrow
Buttons
Figure 4. HEBT-5V Control Panel and Display
To turn the Club Platen Off:
NOTE: This applies only to units with manufacturing
number 9210844.
1.
Set the unit to display temperatures in degrees
Fahrenheit (steps 1a and 1b). Press and hold the MENU
button for five seconds (Figure 5). The control panel
displays “A Platen.”
2. Scroll to “C Platen” with the LEFT or RIGHT arrow
buttons. Press the OK button.
3. Change the “C Platen” value to 0 °F (Fahrenheit) using
the LEFT arrow button. Press the OK button.
4. To set the display back to degrees Celsius, scroll to
“Units,” press the OK button, then scroll to “°C” (Celsius)
and Press the OK button.
Menu
Button
Arrow
Buttons
Operation (continued)
a. Scroll to “Units” with the LEFT or RIGHT arrow
buttons. Press the OK button.
b. Scroll to “° F” (Fahrenheit) with the LEFT or RIGHT
arrow buttons. Press the OK button.
Figure 5. HEBT-5V Control Panel