ANTTI A170, Инструкция по установке и эксплуатации

Страница: 6 / 22

ANTTI-TEOLLISUUS OY
5
ø200
FAN
FLUE PIPE SLEEVE
OVERPRESSURE HATCH
TUBES
FURNACE
INTERMEDIATE JACKETS
OUTER JACKETS
AIR DISTRIBUTION PLATES
WIDTH BURNER
WIDTH
BURNER
INTRODUCTION
- The heater is designed for heating the drying air and blowing it under pressure through the hot air
dryer.
- The delivery of the heater includes the fan with electric motor, the combustion chamber, the heat
exchanger and the frame structure. In connection with the installation the heater is equipped with
the oil burner, thermostats and piping. The required electric cabling is connected in the electric
centre. In addition to this is required a tank for light-oil and a pipeline from the oil tank to the
burner, which fulfils the valid regulations.
- The noise emission by heater type in the heater room is:
A170 86 dB
A190 85 dB A250 91 dB
A330 91 dB A400 92 dB
NOTE! Always use hearing protectors when entering the heater room when the
heater is in operation!
- Dimensions of the heaters:
Note!: The heaters are available for both right and left-handed fan and burner installations.
- Structure of the heater: