Antona Corporation (818)783-4299 URL:http://www.antona.com
14
Appendix C - RF Transmitter and Receiver
The pager function uses a matched set of a hand held 4 button 318MHz
encoded transmitter and an match-coded 4 signal-line output 318MHz receiver. There
is an externally mounted 50-ohm RF antenna that plugs into the BNC connector on the
back of the ANC-7030 chassis marked "ANTENNA".
The following page(s) contain the product technical data for the 318MHz hand
held key-chain transmitter and the mating RF receiver used with the ANC-7030 chassis.
This information is available to current owners of the ANC-7030 by FAX or in
PDF format by e-mail. A specific e-mail with the subject: "ANC-7030 RF318"
should be requested to: [email protected]. Please include the chassis
serial number located on the rear of the chassis near the power input connector.
