1 Safety Instructions
C58IB004EN-D
5
1 Safety Instructions
• Read the documentation before using
DHS 1100.
• Follow all information and instructions contained
in the documentation to ensure the correct use
and safe functioning of DHS 1100.
• The documentation is a part of the product.
Keep this document for the complete working
life of the product and make sure it is easily
accessible to all people involved with the prod-
uct. If you receive any additions or revisions to
the documentation from Anton Paar GmbH,
these must be treated as part of the documenta-
tion.
1.1 General Safety Instructions
Liability
• The documentation does not claim to address
all safety issues associated with the use of the
instrument and samples. It is your responsibility
to establish health and safety practices and
determine the applicability of regulatory limita-
tions.
• Anton Paar GmbH only warrants the proper
functioning of DHS 1100 if no adjustments have
been made to the mechanics, electronics, and
firmware.
• Only use DHS 1100 for the purpose described in
the documentation. Anton Paar GmbH is not lia-
ble for damages caused by incorrect use of
DHS 1100.
Installation and use
• DHS 1100 is
not
an explosion-proof instrument
and therefore must not be operated in areas
with risk of explosion.
• The installation procedure should only be car-
ried out by authorized personnel who are famil-
iar with the installation instructions.
• Do not use any accessories or spare parts other
than those supplied or approved by Anton Paar
GmbH.
• Make sure all operators are trained to use the
instrument safely and correctly before starting
any applicable operations.
• In case of damage or malfunction, do not con-
tinue operating DHS 1100. Do not operate the
instrument under conditions which could result
in damage to goods and/or injuries and loss of
life.
• Check DHS 1100 for chemical resistance to the
samples and cleaning agents.
Maintenance and service
• The results delivered by DHS 1100 not only
depend on the correct functioning of the instru-
ment, but also on various other factors. We
therefore recommend you have the results
checked (e.g. plausibility tested) by skilled per-
sonnel before consequential actions are taken
based on the results.
• Service and repair procedures may only be car-
ried out by authorized personnel or by Anton
Paar GmbH.
Disposal
• Concerning the disposal of DHS 1100, observe
the legal requirements in your country.
Returns
• For repairs send the cleaned DHS 1100 (instru-
ment) to your Anton Paar representative. Only
return the instrument together with the filled out
RMA (Return Material Authorization) and the
form "Safety Declaration for Instrument
Repairs". Please download the Safety Declara-
tion form from our website www.anton-
paar.com.
• Do not return instruments which are contami-
nated by radioactive materials, infectious agents
or other harmful substances that cause health
hazards.
Precautions for highly inflammable samples
and cleaning agents
• Observe and adhere to your national safety reg-
ulations for handling the measured samples
(e.g. use of safety goggles, gloves, respiratory
protection etc.).
• Only store the minimum required amount of
sample, cleaning agents and other inflammable
materials near the DHS 1100.
• Do not spill sample/cleaning agents or leave
their containers uncovered. Immediately remove
spilled sample/cleaning agents.
Содержание DHS 1100
Страница 2: ......
Страница 38: ...Appendix B Declaration of Conformity 38 C58IB004EN D Appendix B Declaration of Conformity ...
