ANTIK IP telephone
77
User manual
ENGLISH
4.2.2 Extended Settings Through Internet Browser
Speed Dial
Key 1
---
Key 2
---
Key 3
---
Key 4
---
Key 5
---
Key 6
---
Key 7
---
Key 8
---
Key 9
---
Key *
---
Key 0
---
Key #
---
Other settings
When dialing, incoming call
busy
Language
English
Redirect all calls
disable
Redirect to
Redirect ring count
4
All incoming calls
enable
Direct dial accept
enable
Outgoing calls
enable
Screen brigthnes stanby
7
Ringer volume
10
Ringer tone
4
Lowest bitrate audio codec G.726/32
DTMF
Only in audio
Jitter buffer
60
ms
Provider support CLIR
disable
Save
Phone book Dial history
Change firmware
Click on...
- In extended setting of the telephone all settings are included in the Chapter
4.1.16 as well as ‘Redirect to’ and ‘Busy’ modes.
- You will save the parameters by using the button "
Save
". After pressing it the
parameters are immediately set with no need to restart the telephone.
- In the lower part there are buttons for entering the phone book, history of calls
and for control change (change of firmware).
4.2.3. Change of Control (Firmware) Through Internet Brow-
ser
- If you need to change control (firmware) in the telephone, you must have
the necessary control file saved onto hard disc of the computer or on its
peripheries.
- In the browser heading you can see the firmware version currently used in the
telephone.
4
