Anthem MRX 300, Руководство по эксплуатации

Страница: 27 / 52

19
3.5 SOURCE SETUP
Inputs and preset listening mode presets are configured in this section.
Audio / Video recording device connected to:
Select the receiver input that the output of your recording device is connected to. This will prevent feedback
if the recorder is accidentally selected as the source to record (a recorder cannot record itself).
HDMI Audio Output:
When set to AVR, no audio is sent to the TV, When set to AVR+TV or TV, audio will be sent to the TV by the
receiver but the format sent to the receiver by the HDMI audio source will be according to the TV’s capability
(e.g. 2-channel), not the receiver’s which is normally higher.
Selecting Main Source Setup displays this menu:
Name:
The source names that appear on the front panel display and some other menus can be changed, up to 8
characters long.
Example: Rename “BDP” to “Blu-ray”.
• Highlight “Name” and press SELECT . The first character (a space) will be highlighted in red.
• Use the
56
buttons to change characters. Change the first one to “B”.
• Use the
34
buttons to move to each remaining character and complete the renaming.
• Press SELECT to return to the menu.
3. SETUP
continued …
Audio/Video Setup and Presets
Main Source Setup
4
Advanced Source Setup
Listening Mode Presets
Video Mode Presets
Audio Rec Device Connected to
None
Video Rec Device Connected to None
HDMI Audio Output AVR
Main Source Setup
Source 1 of 9 (BDP)
Name BDP
Video Output Configuration VidOut 1
Main Video Input HDMI1
Main Audio Input Dig HDMI
Bass Manager Movie