Anthem MRX 300, Руководство по эксплуатации

Страница: 45 / 52

37
4.6.7 DOLBY VOLUME AND DYNAMIC RANGE CONTROL
To use Dolby Volume according to its settings in the level calibration and source setup menus press
DOLBY VOLUME then use
56
keys to select On/Off.
Dolby Volume is on by default – you can change the default in the setup menu. Sources often have
dynamic range controls as well. Be sure to disable them to get the most from the receiver’s dynamics
control. In some cases the setting names in sources are confusing because “Extended” can mean
dynamics are left alone while “Normal” can mean they’re reduced. Check source operating manuals to
find what their settings mean and under what conditions they apply.
When Dolby Volume is Off another dynamic range control becomes available after DOLBY VOLUME is
pressed a second time. This also allows you to control the difference between the softest and loudest
passages, but only on multichannel Dolby Digital and DTS soundtracks that contain dynamic scaling cues.
At least 5.1 speakers must be used. Use the
56
keys to select:
Auto: This is the default setting for Dolby TrueHD and adjusts dynamic range according to
instructions in the soundtrack. Auto is not available for other formats.
Normal: No dynamic range modification.
Reduced: Allows the quieter parts to be heard more easily, and works by raising the level of quieter
sounds and/or reducing the level of louder ones according to cues in the soundtrack.
Late Night: Further reduces the softest-to-loudest difference.
4.7 RESOLUTION
To change the video output resolution without accessing the setup menu, press RESOLUTION
and select.
4.8 DISPLAY BRIGHTNESS
To change the brightness of the front panel display and LED indicators, press DIM on
the remote or DISPLAY on the front panel and select Bright, Dim, or Off.
4.9 SLEEP TIMER
If you would like to go sleep while listening to a program or music, the Sleep Timer will turn the
receiver power off after the selected amount of time. The first
SLEEP keystroke sets the timer
to 30 minutes. Additional keystrokes cycle as follows: Second=60, third=90, fourth=Disabled.
4. OPERATION
continued …