SXM-100 Commercial Satellite Audio Receiver
41
The SXM-100 has detected a fault with
the SiriusXM antenna. The antenna
cable may be either disconnected or
damaged. Verify that the antenna cable
is plugged into the back of the SXM-100.
Inspect the cable for damage and kinks.
Replace the antenna cable if damaged.
Check any in-line amplifiers or splitters
if used.
SiriusXM products are available online at
www.shop.siriusxm.com
.
This is different from “NO SIGNAL”
because the SXM-100 is
not
detecting
the characteristic current draw of a
connected antenna.
The tuner is having difficulty receiving
the SiriusXM satellite signal. Verify the
placement of the antenna. Move the
antenna away from any obstructions.
Inspect the antenna cable for damage
and kinks. Replace the antenna if the
cable is damaged. Check any in-line
amplifiers or splitters if used.
This is different from “CHECK ANTENNA”
because the SXM-100
is
detecting the
characteristic current draw of a
connected antenna, but there is no
usable signal. (see “Positioning the
Antenna” page 8)
The radio has detected a change in your
SiriusXM subscription status. Press the
UP button to clear the message. In the
U.S.A., visit www.siriusxm.com or call 1-
866-635-2349 if you have questions
about your subscription. In Canada,
visit www.siriusxm.ca or call 1-877-438-
9677 if you have questions about your
subscription.
PRESS UP TO
CONTINUE
SUBSCRIPTION
UPDATED-
NO SIGNAL
CHECK
ANTENNA
