SXM-100 Commercial Satellite Audio Receiver
29
to see if they are skipped or not. The display will begin with
the channel you are currently tuned to.
Use the UP and DOWN buttons to navigate to:
Press the MODE button on the front panel or the SETUP key on
the remote control. You should see:
The “###” will be the number of the channel you were tuned
to before entering the Setup Menu. The “N” will be “N” or “Y”
to indicate whether the channel is currently skipped or not.
Pressing the POWER button on the front panel or the remote
control will toggle between “N” and “Y”. Your selection is
saved automatically; there is not a separate save function.
Pressing the UP or DOWN buttons or using the up and down
arrows on the remote control will allow you to move to other
channels to review or change their skipped status. Using the
remote control, if you press and hold the up or down arrows,
you can scroll through the channels.
When finished, press the MODE button on the front panel or
the SETUP key on the remote control to exit.
Skip All Channels
This feature is used if you would like to skip most channels.
For example, there may be only a few channels you wish to
have in your business establishment which match the
environment you want to create. It is much faster to then skip
all channels and then use Skip Single Channels to unskip the
channels you wish to use.
Use the UP and DOWN buttons to navigate to:
SKIP ALL
CHANNELS
SKIP ###? N
PWR TOGGLES
SKIP SINGLE
CHANNELS
