Antenna Assembly
1.
The ClearStream 4 comes with:
• 2 reflectors
• 2 sets of tapered loop elements
• Combiner bars with 75 ohm transformer
• 2 bolts with washers
• 2 cross braces
• 2 Mast clamps
2.
Fit circular base to the reflector, then feed sup
-
plied bolt through the back of the square tube alu
-
minum passing through the hole in the base. Then
align tapered loop element with circular base. Make
sure that both halves of the stand-off columns are
aligned so that the bolt can be secured to the nut
inside the tapered loop
3.
Left, both sets of tapered loops attached to the
reflectors.
Image is facing the rear.
4.
Next, attach the 2 cross braces to the rear of the
reflector as shown using supplied bolts.
Congratulations! You now have one of the most powerful HDTV
antennas available. The ClearStream 4, when installed correctly
should give consistent and reliable reception up to 65 miles
from the broadcast towers. Assembly should take less than 15
minutes.
1.
2.
4.
3.
