877-825-5572
1699 West Fifth Street
Eureka, MO 63025
www.antennasdirect.com
5.
Both halves of antenna joined with cross braces
attached to the rear of the reflectors.
Note: adjustable U bolt mast clamps face the rear
6.
Attach the buss bars to the terminals on each
half of the antenna using the supplied wingnuts. This
electrically connects both halves of the antenna.
Helpful Tips:
•
If your cable run is greater than 75’, A pre-amplifier may be required.
• UHF signals are line of sight. Get as much elevation as practical.
• Attic Installations will cut 40% -50% of your signal strength.
• KEEP ANTENNA AWAY FROM POWER LINES
7. Assembly Complete.
75 Ohm
coax “F” connection is at center.
C4 shown with optional J mount
5.
6.
7.
