Chapter 2: SAFETY
Operating Manual FU3AM-03
Page 7 of 30
2. Safety
2.1 Operating Manual
This operating manual contains safety instructions for correct operation on and of the fre-
quency inverter, they are to be followed.
In addition to the general safety instructions contained in this chapter, the instructions con-
tained in the manual text must also be followed.
No claim is made that the safety instructions are complete. Please contact the manufacturer
in the event of questions or problems.
This manual must be available to all persons who work on or with the frequency inverter and
must remain in good, readable condition.
2.2 Symbols
In these instructions important explanations are highlighted with the following symbols:
Caution: this explanation indicates hazards which, under certain circumstances, may lead to
personal injury or material damage.
Attention required / Check: please pay special attention to the points described.
Information: provides you with further information relating to the product.
2.3 General Safety Information
The frequency inverter was state-of-the-art at the time of delivery and is considered princi-
pally safe to operate. The frequency inverter may present certain dangers to personnel, the
frequency inverter or other assets of the operator when:
♦
non-qualified personnel work on or with the frequency inverter,
♦
Operation of the inverter in other mountings or connections, other than described in this
manual.
♦
the frequency inverter is improperly used.
Then exists danger for:
♦
Persons
♦
The frequency inverter
♦
Other real value of the operator
The installations in which the frequency inverter is incorporated must be designed so that
they fulfil their functions when set up correctly and when used in accordance with the instruc-
tions in fault-free operation and do not cause any danger to persons. This also applies to the
interaction of the frequency inverter with the installation as a whole. In the case of applica-
tions in installations with technical safety requirements and with regard to installation, the
relevant laws and regulations must be complied with (e.g. EN 57100, EN 60204).
!
