P
OWER
O
UTPUT
The TP- 550 distributes a varying maximum number of amps on each rail. To see the output capacity and regulation
for each different voltage, see Table 3.
T
ABLE
3
Output
Voltage
Min. Load
Load Max.
Regulation
Ripple & Noise
+3.3V
0A
25A
±5%
<50 mV
+5V
0A
25A
±5%
<50 mV
+12V1
0A
20A
±3%
<120 mV
+12V2
0A
20A
±3%
<120 mV
+12V3
0A
20A
±3%
<120 mV
+12V4
0A
20A
±3%
<120 mV
–12V
0A
0.8A
±10%
<120 mV
+5VSB
0A
3A
±5%
<50 mV
The continuous maximum total output power shall not exceed 550W.
+12V1, +12V2 , +12V3 and +12V4 DC maximum output power shall not exceed 540W (45A).
+3.3V and +5V DC maximum combined output power shall not exceed 140W.
I
NSTALLATION
:
1.
Install the TP-550 PSU into your case with the four screws provided.
2.
Connect the 24-pin main power connector to your motherboard. If your motherboard uses a 20-pin
connector, detach the 4-pin attachment on the 24-pin connector.
Note:
The detachable 4-pin section cannot be used in place of a 4-pin +12V connector.
