Antec Sonata Proto, Руководство пользователя

Страница: 17 / 24

P 16
3.4 R
EWIRING
M
OTHERBOARD
H
EADER
C
ONNECTIONS
There may come a time when you need to reconfigure the pin-out of a
motherboard header connector. Examples could be for your USB header, audio
input header, or some other front panel connector such as the Power Button
connector.
Before performing any work, please refer to your motherboard user’s manual
or your motherboard manufacturer's website to be sure of the pin-out needed
for your connector. We strongly recommend making a notated drawing before
beginning work so that you can recover if your work gets disturbed.
1. Determine which wires you need to remove in order to rewire your plug
to match the USB pin-outs on your motherboard (refer to your
motherboard user’s manual). Working on one connector at a time, use a
very small flathead screwdriver or similar tool to lift up on the black tab
located beside the gold posts (squares). This will allow you to easily slide
out the pins from the USB plug.
2. Working carefully so as not to damage the wires, connectors, or
pins, slowly remove the pin from the connector. Repeat these
steps for each wire you need to change.
3. Slowly, carefully reinsert the pin into the correct slot of the
connector then snap closed the black tab that was lifted in step 1.
Repeat these steps for each wire you need to change.