9
MAINTENANCE AND STORAGE
Good maintenance and appropriate
storage of your PPE will prolong the
working-life of your product, while
guaranteeing your safety. Be sure to
comply with these recommendations:
The harness should be cleaned
with water and a mild soap. Never
use acid, solvents or anything
based on this.
Leave it to dry in a wellventilated
area, away from sources of heat.
Store the harness away from
humidity and ultraviolet light.
Lubrication: lubricate the moving
parts with a lubricant based on
silicone. Lubrication is carried out
after the cleaning and drying of
the product. Avoid contact with
textile parts.
Disinfection: immerse the mobile
fall arrester for one hour in a
solution of tepid water and a
disinfectant based on quarter-
nary ammonium salts. Rinse with
drinking water and wipe with a
clean cloth.
Storage: after cleaning, drying
and lubrication, store the
unpacked product in a dry and
cool place away from any sharp
objects and from any chemical or
corrosive products.
Preserve the mobile fall arrester and
its work positioning support away
from UV rays and direct or excessive
sources of heat,or excessively high re-
lative humidity or places where the sa-
line concentration is high. Avoid using
the product in a salty environment
and do not store it wet.
TRANSPORT
During transport, check that your PPE
is stored well away from any source of
heat, damp, corrosive atmosphere, ul-
traviolet rays, etc.
PACKAGING
This PPE is sold in rot proof and wa-
terproof plastic packaging, with its
instructions for use.
MARKINGS
The name, trademark or any other
means of identifying the manu-
facturer or the supplier,
The batch or serial number.
Identification mark of model or
type of mobile fall arrester
EN xxx-x : xxxx : Number and year
of European conformity standards
0333 : EC logo followed by the
number of the organizationnoti-
fied to monitor the production.
:The standardized pictogram
informing the user to read the
instructions
Marking indicating correct
orientation in the course of use
Indication concerning the type of
flexible work positioning support
on which the mobile fall arrester
must not be used
For rope grabs of the EN353-1,
maximum user weight (attire and
equipment included)
GB
NT90008818 IND E.indd 9
22.8.2011 13:07
Содержание BLOCMAX
