5
Do not allow the fog liquid to become contaminated. Always replace the caps on the fog liquid container and
the fog machine liquid tank immediately after filling. After every 40 hours of continuous operation, it is
recommended to run a cleaning solution composed of 80% distilled water and 20% white vinegar through the
system to prevent the accumulation of particulate matter in the heating element.
The recommended cleaning regimen is as follows:
1.
Empty all fog liquid from machine. Add cleaning solution to tank. Plug unit in and begin warm up.
2.
Run unit in a well-ventilated area until tank is almost empty. Do not allow the pump to run dry.
3.
Cleaning is now complete. Refill with fog liquid. Run the machine briefly to clear any cleaning solution from
the pump and heater.
4.
Do not operate the fog machine without liquid at any time.
Note:
All fog machines are prone to clogging due to the thick consistency of fog liquid and the high
temperature at which it vaporizes. However, a properly maintained fog machine should provide years of
reliable use.
Clean with a dry cloth only. Store dry.
Cleaning your fog machine regularly will help reduce costly replacement and repair charges.
Storage
When storing run distilled water (not tap water) through the system as described in the cleaning regimen above.
This will help avoid any particles condensing inside the pump or heater.
Please read and save these instructions.
