ANTAIRA LNP-0800G-M12-67-24 Скачать руководство пользователя страница 21

Страница: 21 / 23

Antaira Technologies - Industrial Ethernet Switches

LNP-0800G-M12-67-24 User Manual V1.0

6. Trouble Shooting

Verify you have the right power cord or adapter. Never use a power supply or adapter with a non-

compliant DC output voltage or it will burn the equipment.

Select the proper cable to construct your network. Please check that you are using the right cable.

Diagnosing LED Indicators: To assist in identifying problems, the switch can be easily monitored

with the LED indicators which help to identity if any problems exist.

Please refer to the

LED Indicators

section for LED light indication.

If the power indicator LED does not turn on when the power cord is plugged in, the user may

have a problem with the power cord. Check for loose power connections, power losses, or

surges at the power outlet.

Please contact Antaira for technical support service if the problem still cannot be resolved.

If the industrial switch

’s LED indicators are normal and the connected cables are correct but the

packets still cannot transmit, please check the system’s Ethernet devices’ configuration or status.

Содержание LNP-0800G-M12-67-24
























Результаты поиска

Содержание LNP-0800G-M12-67-24

Отзывы:

Похожие инструкции для LNP-0800G-M12-67-24

Бренды по названию

Популярные бренды

ANTAIRA LNP-0800G-M12-67-24, Руководство пользователя

Результаты поиска

Содержание LNP-0800G-M12-67-24

Отзывы:

Похожие инструкции для LNP-0800G-M12-67-24

Бренды по названию

Популярные бренды